Перейти к основному содержанию

Как выполнить автозаполнение при вводе в раскрывающемся списке Excel?

Для раскрывающегося списка проверки данных с большим количеством элементов необходимо прокручивать список вверх и вниз, чтобы найти нужный элемент, или правильно ввести все слово в поле списка. Есть ли способ сделать выпадающий список автозаполнением при вводе соответствующих символов? Это поможет людям более эффективно работать на листах с раскрывающимися списками в ячейках. В этом руководстве представлены два метода, которые помогут вам достичь этого.

Сделать выпадающие списки автозаполненными с кодом VBA
Легко сделать раскрывающиеся списки автозаполнением за 2 секунды

Дополнительные руководства для раскрывающегося списка ...


Сделать выпадающие списки автозаполненными с кодом VBA

Чтобы раскрывающийся список автоматически заполнялся после ввода соответствующих букв в ячейке, сделайте следующее.

Во-первых, вам нужно вставить поле со списком в рабочий лист и изменить его свойства.
  1. Откройте лист, содержащий ячейки раскрывающегося списка, для которых вы хотите сделать их автозаполнением.
  2. Прежде чем вставлять поле со списком, вам необходимо добавить вкладку «Разработчик» на ленту Excel. Если на ленте отображается вкладка «Разработчик», перейти к шагу 3. В противном случае сделайте следующее, чтобы вкладка «Разработчик» появилась на ленте: Нажмите Файл > Опции для открытия Опции окно. В этом Параметры Excel окна, нажмите Настроить ленту на левой панели проверьте Застройщик поле, а затем щелкните OK кнопка. Смотрите скриншот:
  3. Нажмите Застройщик > Вставить > Поле со списком (элемент управления ActiveX).
  4. Нарисуйте поле со списком на текущем листе. Щелкните правой кнопкой мыши и выберите Объекты из контекстного меню.
  5. В Объекты диалоговое окно, замените исходный текст в (Имя) поле с ТемпКомбо.
  6. Выключить Режим проектирования кликнув Застройщик > Режим дизайна.
Затем примените приведенный ниже код VBA
  1. Щелкните правой кнопкой мыши вкладку текущего листа и выберите Просмотреть код из контекстного меню. Смотрите скриншот:
  2. В открытии Microsoft Visual Basic для приложений окна, скопируйте и вставьте приведенный ниже код VBA в окно кода рабочего листа.
    Код VBA: автозаполнение при вводе в раскрывающемся списке
    Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    'Update by Extendoffice: 2020/01/16
        Dim xCombox As OLEObject
        Dim xStr As String
        Dim xWs As Worksheet
        Dim xArr
        
        Set xWs = Application.ActiveSheet
        On Error Resume Next
        Set xCombox = xWs.OLEObjects("TempCombo")
        With xCombox
            .ListFillRange = ""
            .LinkedCell = ""
            .Visible = False
        End With
        If Target.Validation.Type = 3 Then
            Target.Validation.InCellDropdown = False
            Cancel = True
            xStr = Target.Validation.Formula1
            xStr = Right(xStr, Len(xStr) - 1)
            If xStr = "" Then Exit Sub
            With xCombox
                .Visible = True
                .Left = Target.Left
                .Top = Target.Top
                .Width = Target.Width + 5
                .Height = Target.Height + 5
                .ListFillRange = xStr
                If .ListFillRange = "" Then
                    xArr = Split(xStr, ",")
                    Me.TempCombo.List = xArr
                End If
                .LinkedCell = Target.Address
            End With
            xCombox.Activate
            Me.TempCombo.DropDown
        End If
    End Sub
    Private Sub TempCombo_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
        Select Case KeyCode
            Case 9
                Application.ActiveCell.Offset(0, 1).Activate
            Case 13
                Application.ActiveCell.Offset(1, 0).Activate
        End Select
    End Sub
  3. Нажмите другой + Q клавиши одновременно, чтобы закрыть Приложения Microsoft Visual Basic окно.

С этого момента, когда щелкают ячейку раскрывающегося списка, раскрывающийся список будет запрашивать автоматически. Вы можете начать вводить букву, чтобы соответствующий элемент автоматически заполнялся в выбранной ячейке. Смотрите скриншот:

Примечание: Этот код не работает для объединенных ячеек.

Легко сделать раскрывающийся список автозаполнением за 2 секунды

Для большинства пользователей Excel описанный выше метод VBA сложен в освоении. Но с Раскрывающийся список с возможностью поиска особенность Kutools for Excel, вы можете легко включить автозаполнение для раскрывающихся списков проверки данных в указанный диапазон всего за 2 секунды. Более того, эта функция доступна для всех версий Excel.

Функции: Перед применением этого инструмента установите Kutools for Excel в первую очередь. Перейти к бесплатной загрузке сейчас.

  1. Чтобы включить автозаполнение в раскрывающихся списках, сначала выберите диапазон с раскрывающимися списками. Затем перейдите к Кутулс , выберите Раскрывающийся список > Сделать раскрывающийся список доступным для поиска, автоматическое всплывающее окно.
  2. В Сделайте раскрывающийся список доступным для поиска диалоговом окне нажмите кнопку OK чтобы сохранить настройку.
Результат

После завершения настройки щелчок по ячейке раскрывающегося списка в указанном диапазоне приведет к появлению списка. При вводе символов, если один элемент точно соответствует, все слово сразу выделяется в поле списка и может быть заполнено в ячейку раскрывающегося списка, просто нажав клавишу Enter.

Внимание: Чтобы применить эту функцию, пожалуйста, скачайте и установите Kutools для Excel первый. Или вы можете нажмите, чтобы узнать больше об этой функции.

Статьи по теме:

Как создать раскрывающийся список с несколькими флажками в Excel?
Многие пользователи Excel, как правило, создают раскрывающийся список с несколькими флажками, чтобы выбирать несколько элементов из списка за раз. На самом деле вы не можете создать список с несколькими флажками с проверкой данных. В этом руководстве мы покажем вам два метода создания раскрывающегося списка с несколькими флажками в Excel. В этом руководстве представлен метод решения проблемы.

Создать раскрывающийся список из другой книги в Excel
Создать раскрывающийся список проверки данных среди листов в книге довольно просто. Но если данные списка, необходимые для проверки данных, находятся в другой книге, что вы будете делать? В этом руководстве вы узнаете, как подробно создать раскрывающийся список из другой книги в Excel.

Создайте раскрывающийся список с возможностью поиска в Excel
Для раскрывающегося списка с многочисленными значениями найти подходящий - непростая задача. Ранее мы ввели метод автоматического заполнения раскрывающегося списка при вводе первой буквы в раскрывающемся списке. Помимо функции автозаполнения, вы также можете сделать раскрывающийся список доступным для поиска для повышения эффективности работы при поиске правильных значений в раскрывающемся списке. Чтобы сделать раскрывающийся список доступным для поиска, попробуйте метод, описанный в этом руководстве.

Автоматическое заполнение других ячеек при выборе значений в раскрывающемся списке Excel
Допустим, вы создали раскрывающийся список на основе значений в диапазоне ячеек B8: B14. При выборе любого значения в раскрывающемся списке необходимо, чтобы соответствующие значения в диапазоне ячеек C8: C14 автоматически заполнялись в выбранной ячейке. Для решения проблемы методы, описанные в этом руководстве, окажут вам услугу.

Дополнительные руководства для раскрывающегося списка ...

Лучшие инструменты для офисной работы

🤖 Kutools AI Помощник: Революционный анализ данных на основе: Интеллектуальное исполнение   |  Генерировать код  |  Создание пользовательских формул  |  Анализ данных и создание диаграмм  |  Вызов функций Kutools...
Популярные опции: Найдите, выделите или определите дубликаты   |  Удалить пустые строки   |  Объедините столбцы или ячейки без потери данных   |   Раунд без формулы ...
Супер поиск: Множественный критерий VLookup    VLookup с несколькими значениями  |   VLookup по нескольким листам   |   Нечеткий поиск ....
Расширенный раскрывающийся список: Быстрое создание раскрывающегося списка   |  Зависимый раскрывающийся список   |  Выпадающий список с множественным выбором ....
Менеджер столбцов: Добавить определенное количество столбцов  |  Переместить столбцы  |  Переключить статус видимости скрытых столбцов  |  Сравнить диапазоны и столбцы ...
Рекомендуемые функции: Сетка Фокус   |  Просмотр дизайна   |   Большой Формулный Бар    Менеджер книг и листов   |  Библиотека ресурсов (Авто текст)   |  Выбор даты   |  Комбинировать листы   |  Шифровать/дешифровать ячейки    Отправлять электронные письма по списку   |  Суперфильтр   |   Специальный фильтр (фильтровать жирным шрифтом/курсивом/зачеркиванием...) ...
15 лучших наборов инструментов12 Текст Инструменты (Добавить текст, Удалить символы, ...)   |   50+ График Тип (Диаграмма Ганта, ...)   |   40+ Практических Формулы (Рассчитать возраст по дню рождения, ...)   |   19 Вносимые Инструменты (Вставить QR-код, Вставить изображение из пути, ...)   |   12 Конверсия Инструменты (Числа в слова, Конверсия валюты, ...)   |   7 Слияние и разделение Инструменты (Расширенные ряды комбинирования, Разделить клетки, ...)   |   ... и более

Улучшите свои навыки работы с Excel с помощью Kutools for Excel и почувствуйте эффективность, как никогда раньше. Kutools for Excel предлагает более 300 расширенных функций для повышения производительности и экономии времени.  Нажмите здесь, чтобы получить функцию, которая вам нужна больше всего...

Описание


Вкладка Office: интерфейс с вкладками в Office и упрощение работы

  • Включение редактирования и чтения с вкладками в Word, Excel, PowerPoint, Издатель, доступ, Visio и проект.
  • Открывайте и создавайте несколько документов на новых вкладках одного окна, а не в новых окнах.
  • Повышает вашу продуктивность на 50% и сокращает количество щелчков мышью на сотни каждый день!
Comments (325)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Hi, many thanks for this material. It helped a lot.
This comment was minimized by the moderator on the site
Hello,

following on from my last comment:

I'm setting up 'standard' rows with the dropdown lists in them. These I'm wanting to copy below into an extensive spreadsheet.
Unfortunately the dropdown's don't copy down when I do that after using the VBA.
Is there a way to do whats described above?

Cheers,
Catherine
This comment was minimized by the moderator on the site
Hi Catherine,
The autocomplete drop-down lists generated by VBA code cannot be copied. You can only copy selected items that are displayed in the drop-down cell. Sorry for the inconvenience.
This comment was minimized by the moderator on the site
Hello,

Have implemented this successfully, so thank you for this page and code.
But now I have an associated problem...:

After doing all of the above points, the code works as described, but I cannot do any undo/redo actions in the entire spreadsheet.
Is there a way to turn this combo box on for when I want to work with the dropdowns and off for when I want to work in other cells? so that the undo/redo actions are possible again?
and note, yes I have turned the design mode off after doing the above steps, but it still doesn't help the problem.

Cheers,
Catherine
This comment was minimized by the moderator on the site
Hi Catherine Foley,
If you want to use the undo operation on cells other than the drop-down cells, the following VBA code can help you. Please give it a try.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Update by Extendoffice: 2022/09/22
    Dim xCombox As OLEObject
    Dim xStr As String
    Dim xWs As Worksheet
    Dim xArr
    
    On Error Resume Next

    Set xWs = Application.ActiveSheet
    
    Set xCombox = xWs.OLEObjects("TempCombo")
    If Target.Validation.Type <> 3 Then
        If xCombox.Visible Then
            xCombox.Visible = False
        End If
        Exit Sub
    End If
    
    With xCombox
        .ListFillRange = ""
        .LinkedCell = ""
'        .Visible = False
    End With

    Target.Validation.InCellDropdown = False
    Cancel = True
    xStr = Target.Validation.Formula1
    xStr = Right(xStr, Len(xStr) - 1)
    If xStr = "" Then Exit Sub
    With xCombox
        .Visible = True
        .Left = Target.Left
        .Top = Target.Top
        .Width = Target.Width + 5
        .Height = Target.Height + 5
        .ListFillRange = xStr
        If .ListFillRange = "" Then
            xArr = Split(xStr, ",")
            Me.TempCombo.List = xArr
        End If
        .LinkedCell = Target.Address
    End With
    xCombox.Activate
    Me.TempCombo.DropDown

End Sub
Private Sub TempCombo_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
    Select Case KeyCode
        Case 9
            Application.ActiveCell.Offset(0, 1).Activate
        Case 13
            Application.ActiveCell.Offset(1, 0).Activate
    End Select
End Sub
This comment was minimized by the moderator on the site
I hope now it will be upload
This comment was minimized by the moderator on the site
This code works really well for a single drop down. However, if I have 5 dropdowns using the same list of values but they need to operate independently of each other how is that accomplished? Despite my best efforts, if I put more than one combo box on the page, any selection is one is mirrored in the other.
This comment was minimized by the moderator on the site
Hi Mbuchmeier,Only need one combo box on the page. The code works on all drop-down lists in current page. You just need to manually click on the drop-down list cell to activate the combo box.
This comment was minimized by the moderator on the site
Hi crystal,
I am working with the combo box (The VBA code from 2021/11/05). It is working great and very useful but there are 2 issues:1. Issue #1: Usually when you work on any cell in Excel, there is indication on the row number which indicate which row you work about. When the combo box is opened this indication is missing2.  Issue #2: When the combo box is opened in the last column of the dynamic table, then it isn't  working as usual: when I select value from the list, the cell remain empty until I move the cursor to another cell
Attached screenshot.
Thank in advance
This comment was minimized by the moderator on the site
Hi Yoni,Thanks for your feedback. For the issues you mentioned:1. Issue #1: Excel does not highlight the row number when selecting an object in the worksheet. Since we use a combo box to replace the data validation drop-down list to handle the autocomplete operation, we can't show the indication in this case;2. Issue #2: I have tried as you described, but the problem cannot be reproduced. The screenshot you attached does not display, you need to save the screenshot and uplode it via the "Upload files" button below.
This comment was minimized by the moderator on the site
Hi Crystal,Thanks a lot for your response. Attached the screenshot. hope it will work now
This comment was minimized by the moderator on the site
Hi Yoni,Sorry for the inconvenience. The screenshot you uploaded is still not shown on the page. You need to save the screenshot on your disk in advance and then uplode it via the "Upload files" button. See the attached screenshot.
This comment was minimized by the moderator on the site
will, thank you is not enugh :::: alot of thank you then ;;;;; that worked like magic :)
This comment was minimized by the moderator on the site
Yeah, basically completely useless.  Want the cell to auto-complete when typing in a cell using list data validation.Tried this, and now I have to start over from scratch because I can't Undo it.  Thanks.Also loaded with syntax errors.
This comment was minimized by the moderator on the site
It works as it should be except for two things, first, there is no validation after insertion. i.e. if I typed anything at the combo then clicked enter it will accept the typed value while it should not do this since the data validation is being used to prevent such behaviors and make sure that the entered data is from selected range. Second, at the data validation list, sometimes I use big range with empty cells and select ignore empty at validation list but the combo takes all the range and shows it, will be nice to remove the empty cells from the combo range.
Thanks & hope you can implement these things to make it perfect.
This comment was minimized by the moderator on the site
Hi, AhmedThe VBA below helps to solve the problem of blank cells. Since the Combo box accepts the value that are not in the list, we still can't find a way to solve this problem. Sorry for the inconvenience.
<div data-tag="code">Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Update by Extendoffice: 2021/11/05
Dim xCombox As OLEObject
Dim xStr As String
Dim xWs As Worksheet
Dim xArr, xArr1
Dim xRg As Range
Dim xSrc As Variant
Dim xI, xJ, xIndex, xCount As Integer

Set xWs = Application.ActiveSheet
On Error Resume Next
Set xCombox = xWs.OLEObjects("TempCombo")
With xCombox
.ListFillRange = ""
.LinkedCell = ""
.Visible = False
End With
If Target.Validation.Type = 3 Then
Target.Validation.InCellDropdown = False
Cancel = True
xStr = Target.Validation.Formula1
xStr = Right(xStr, Len(xStr) - 1)
If xStr = "" Then Exit Sub
Set xRg = Range(xStr)
If xRg Is Nothing Then
xArr1 = Split(xStr, ",")
Else
ReDim xArr1(0 To xRg.Count - 1)
For xI = 0 To xRg.Count - 1
xArr1(xI) = xRg.Item(xI + 1).Value
Next
End If
xI = 0
xCount = UBound(xArr1) + 1
For xJ = 0 To UBound(xArr1)
If Replace(xArr1(xJ), " ", "") = "" Then xCount = xCount - 1
Next
ReDim xArr(0 To xCount - 1)
xIndex = 0
For xJ = 0 To UBound(xArr1)
If Replace(xArr1(xJ), " ", "") <> "" Then
xArr(xIndex) = xArr1(xJ)
xIndex = xIndex + 1
End If
Next
xStr = ""
With xCombox
.Visible = True
.Left = Target.Left
.Top = Target.Top
.Width = Target.Width + 5
.Height = Target.Height + 5
.ListFillRange = xStr
If .ListFillRange = "" Then
'xArr = Split(xStr, ",")
Me.TempCombo.List = xArr
End If
.LinkedCell = Target.Address
End With
xCombox.Activate
Me.TempCombo.DropDown
End If
End Sub
Private Sub TempCombo_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Select Case KeyCode
Case 9
Application.ActiveCell.Offset(0, 1).Activate
Case 13
Application.ActiveCell.Offset(1, 0).Activate
End Select
End Sub
This comment was minimized by the moderator on the site
Hi Crystal,
I am working with the combo box (The VBA code from 2021/11/05). It is working great and so useful! thanks a lot.
I found the source of my problem. There was a line of freeze panes which override the combo box.
The only problem now is that the Undo is not working. Any idea?
Thanks in advanced,
Yoni
This comment was minimized by the moderator on the site
Hi,
The code does not support Undo. Sorry for the inconvenience.
This comment was minimized by the moderator on the site
Thanks. Maybe do you know why Worksheet_Change event is not firing once I choose value from the combo box?
This comment was minimized by the moderator on the site
Hi, could you please doublecheck this code, when I use it instead of the dropdown list appearing, the source for the dropdown appears instead. This is the exact function I want, could you please fix it.
This comment was minimized by the moderator on the site
If you use a named range or something similar, like I have with a table column, it will display the named range name instead of the values in that named range. To get what you want, you need to change the xStr to display the worksheet range of that named range, since the .ListFillRange does not take in named ranges directly. This should accomplish it : dim RangeAddress as String: RangeAddress = Range(YourNamedRange).addressand then make the xStr something like this: xStr = "YourWorksheetNameWithTheNamedRangeInIt!" & RangeAddress (important: add the '!' for the sheet reference)
This will make your xStr look something like: NamedRangeSheet!$A$1:$A$5
xStr = Right(xStr, Len(xStr) - 1)

If .ListFillRange = "" Then
xArr = Split(xStr, ",")
Me.TempCombo.List = xArr
End If

with these adjustments your combobox should display the list values instead of the source
This comment was minimized by the moderator on the site
Hi Syu,Sorry I don't quite understand your description. Can you try to be more specific of it?After applying the VBA code mentioned in the above method, when the cell with the data validation drop-down list is checked, the drop-down list turn into a combo box, and then all the items in the list are listed. 
This comment was minimized by the moderator on the site
do you have an example file please?
This comment was minimized by the moderator on the site
Hello. The code is very cool. Please make sure that the formula "INDIRECT" is carried out and displayed. It is very necessary
This comment was minimized by the moderator on the site
The code is not working for a validation list which is created by vba code and the source is a named range
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations